DDC POLYLASE LP, Руководство оператора

Страница: 38 / 55

- 4 -
Beam Delivery System Connection
Fiber Support Arm Installation
Before attaching the beam delivery system, it is important to install the fiber support arm
(fiber support pole) to the back of the machine. This arm provides support for the fiber
conduit and handpiece both while in use and in standby.
The black adjustment knobs on the arm (see Figure 3-3) can be loosened in order to
position the arm segments in the desired positions. Then, firmly lock the knobs in place
to keep the arm rigid. For installation, position the arm as shown in Figure 4-2. Screw the
attachment knob all the way into the fiber support holder. The pole should rest in the
groove of the clamp already installed on the rear of the machine. Once the pole is
installed, attach the second piece, Fiber Support Clamp 2 (see Fig. 4-2) with 4 M3
screws. Tightening the M3 screws all the way will lock the pole in place while loosening
the screws will allow the pole to freely swing back and forth.
Figure 4-2. Fiber Support Arm Installation
Fiber Support Clamp 1
Fiber Support Clamp 2
Fiber Support Arm
Attachment Knob
Fiber Support Arm
Holder