DDC POLYLASE LP, Руководство оператора

Страница: 13 / 55

- 1 -
4000-001A
Overview
All persons operating the POLYLASE LP Pulsed Dual Output Laser and all who are in
the vicinity of the laser must be aware of the potential hazards of the POLYLASE LP
Pulsed Dual Output Laser output. Be certain all personnel carefully review the safety
precautions pertaining to the POLYLASE LP Pulsed Dual Output Laser. Only authorized
individuals with appropriate laser training and knowledge should operate, assist in the
operation of, or provide maintenance/service to the laser system.
Warning
The electrical and laser radiation hazards present during servicing of
the POLYLASE LP Pulsed Dual Output Laser can be very dangerous
if proper safety precautions are not taken. Therefore, the POLYLASE
LP Pulsed Dual Output Laser may only be serviced by qualified
technicians who have received appropriate training on the laser from
DDC Technologies, Inc., and who are familiar with the safety
considerations discussed in this section.
The POLYLASE LP Pulsed Dual Output Laser has been designed for
the safest possible operation and maintenance. However, any laser
system can cause injury if it is not properly installed, operated,
moved and serviced. The potential hazards associated with the
POLYLASE LP Pulsed Dual Output Laser may include: ocular
damage resulting from exposure to direct or reflected laser radiation,
electrical shock from contact with electrical components inside the
system, and physical injury incurred while moving the laser.
Caution
Use of controls or adjustments or performance of procedures other
than those specified herein may result in hazardous radiation
exposure.
To avoid these hazards, the following precautions must be observed
when installing, operating, moving or servicing the system.