DCS RDV2-304, Руководство пользователя

Страница: 39 / 60

37
CARE AND CLEANING
WHAT?
HOW OFTEN?
HOW? IMPORTANT!
OVEN PARTS
Oven door
gasket Avoid cleaning this part. If you need
to remove large food particles off it,
proceed as follows:
1 Dampen a sponge with clean hot
water.
2
Gently wipe off the soiling, but do
not rub.
3
Press a dry towel gently on the
gasket to dry.
●
Do not use any cleaning
agent on the gasket.
●
The gasket is essential
for a good seal. Take care
not to rub, displace, or
damage it.
COOKTOP PARTS
Burner caps
and brass
flame
spreaders 1 Check that the burner is turned
OFF and allow it to cool.
2
Lift off the burner cap and brass
flame spreader.
3
Wash them in hot soapy water,
rinse, and dry.
●
Use a stiff nylon brush or straight-
ended paper clip to clear the
notches of the flame spreader.
4 Replace the flame spreader and
burner cap correctly. See ‘Replacing
the burner parts’.
●
Keep the notches of
the flame spreaders
clear. Soiling may clog
these and cause ignition
problems.
●
Before replacing the
burner parts, check that
they are dry. Wet burner
parts may result in an
irregular flame.
●
Before lighting a burner
you have reassembled,
check that all of its parts
are positioned correctly.
Incorrect assembly can
cause dangerous irregular
flames and ignition
problems.
Ignitors
1
Check that the burner is turned
OFF.
2
Clean the ignitor with a small brush
(e.g. old toothbrush) or cotton swab
that has been dipped into rubbing
alcohol.
The ignitors must be kept
clean and dry to work
correctly. Dirty
or wet ignitors could cause
constant clicking and
sparking, even if a flame is
present.
Burner grates
1
Wait until the grates have cooled
completely.
2 Carefully lift the grates off the
cooktop and place them on a
protected surface.
3 To remove stubborn stains, soak
the grates in a mixture of clothes
washing detergent and water.
4
Wash in a mixture of hot water and
dishwashing liquid, then rinse and
allow to dry.
●
The grates are also dishwasher safe.
●
Take care, the grates are
heavy.
●
Make sure you place a
dish towel or other soft
cover on the surface
before putting a grate
on it.