30
COOKTOP USE
Using the cooktop burners
1
Identify the knob of the burner you want
to use.
3
When the burner has lit, turn the knob
to any setting between HI (high) and
SIM (simmer).
●
The clicking should stop as soon as the
burner has lit.
●
If the burner doesn’t light, and/or the
clicking doesn’t stop, or the flames
are not blue and well-defined, turn the
knob clockwise back to OFF and see
‘Troubleshooting’ for advice.
4
When you have finished cooking, turn
the knob clockwise back to OFF.
●
The knob will release and the burner and
halo will go out.
●
If you are using LP gas, there may be
a slight ‘extinction pop’ or flash at the
flame spreader a few seconds after
the burner has been turned off. This is
normal for LP gas.
2
Push the knob in and turn it
counterclockwise to LITE.
●
Make sure you stop at LITE before turning
the knob to any flame setting.
●
The halo will glow orange.
●
You will start hearing a clicking
sound. If there is no clicking, turn the
knob clockwise back to OFF and see
‘Troubleshooting’ for advice.
Halo
(Orange)
Halo
(Unlit)
Halo
(Orange)
Содержание RDV2-304
Страница 1: ...Professional range RGV2 RDV2 RGCV2 models US CA USER GUIDE ...
Страница 57: ...55 ...
Страница 58: ......
Страница 59: ......