manualshive.com logo in svg

dbx DriveRack VENU 360, Руководство пользователя

Dbx DriveRack VENU 360 - профессиональный процессор сигналов для живых выступлений и установленной звуковой системы. Владельцы могут загрузить бесплатное Руководство пользователя на manualshive.com. Manual доступно для загрузки на русском языке, помогая оптимизировать звучание и управление звуковыми настройками.

Поделиться
Скачать
background image

59

• 

CLEAR <PRESS SELECT>

Selecting this option then pressing the 

SELECT

 wheel triggers the clear function, which removes set AFS filters. The 

clear function allows you to either clear only the Live filters or all AFS filters so you can ring out the system for a new 
venue. The CLEAR MODE parameter selects which filters will be cleared when performing the clear function. 

WARNING!

 If AFS is turned on and filters are set (in use), be careful when clearing AFS filters, as all filters will 

be immediately removed from the signal path and sudden feedback could occur. It is recommended that you lower 
your mixer output levels before clearing AFS filters.

• 

MODE 

[FIXED, LIVE]

This parameter determines whether the AFS algorithm will set Live or Fixed filters. Select the FIXED mode option to 
initially ring out the system for optimal gain before feedback using the Fixed filters. Fixed filters are “static” and will 
remain set until you manually clear them. 

Once you have rung out the system with the Fixed filters, set the mode to LIVE to further protect the system from 
feedback during the performance using the Live filters. In Live mode, AFS uses logic to determine what is feedback 
and what is not. The enhanced AFS algorithm in the VENU360 can better distinguish between program material and 
feedback, dramatically lowering the probability of false Live filters being set on feedback-like music content.

Live filters are “dynamic” and will update as feedback conditions change. When all of the Live filters have been set, they 
will begin to round robin – meaning that if all Live filters have been set and new feedback occurs, the first Live filter set 
will be released then re-set at the new feedback frequency location. The Live filters can be set to release after a period 
of time by enabling the LIVE LIFT option and adjusting the LIFT AFTER parameter. Note that when you run the AFS 
Wizard, AFS will automatically switch between Fixed and Live mode operation behind the scenes.

• 

TYPE 

[SPEECH, SPEECH/MUSIC, MUSIC]

This parameter sets the width and sensitivity of the AFS filters. The available options are:

SPEECH (Constant bandwidth of 11 Hz below 76 Hz, constant Q of 7 at or above 76 Hz)

This option is optimized for speech sound reinforcement, where wider notch filters are less noticeable. Select this 
option when using the sound reinforcement system for speech only. With this option selected, notch filters will be 
wider, but will provide the fastest, most solid protection against feedback.

SPEECH/MUSIC (Constant bandwidth of 9 Hz below 260 Hz, constant Q of 29 at or above 260 Hz)

This option is optimized for live music sound reinforcement or speech and provides the best all-around protection. It 
will provide the best combination of fast feedback suppression and precision, using filters slightly narrower and less 
audible than the SPEECH setting, but slightly faster than the MUSIC setting. If you’re not sure which setting to use, 
select this option. 

MUSIC (Constant bandwidth of 8 Hz below 927 Hz, constant Q of 116 at or above 927 Hz)

This option is optimized for live music sound reinforcement and offers the highest level of sonic quality. When this 
option is selected, the AFS algorithm will zero in on the offending feedback frequency, while leaving the surrounding 
frequencies unscathed. With this option selected, the AFS filters will take slightly longer to set than when using the 
SPEECH/MUSIC setting, although the difference in time will be quite negligible.

NOTE:

 To guarantee that feedback is suppressed using the minimum number of filters possible, AFS may 

automatically widen filters. For example, if you had selected the MUSIC setting and an adjacent frequency is feeding 
back, AFS will detect both frequencies, and if they are in close enough proximity, will set a single, wider filter rather 
than two narrow filters. Using a single, wider filter rather than two narrow filters will not alter the sonic quality and will 
ensure that the maximum number of filters will always be available for use. Automatically adjusted filter widths will 
never be any wider than the SPEECH setting.

Содержание DriveRack VENU 360





















































































































Отзывы:

Нет отзывов

Похожие инструкции для DriveRack VENU 360

Fender 1 Brochure preview
1
Бренд: Fender Страницы: 15
J D Squared 4 Assembly & Operating Instructions preview
4
Бренд: J D Squared Страницы: 18
GE b30 User'S Reference Manual preview
b30
Бренд: GE Страницы: 242
GE ATS1290 Instruction Manual preview
ATS1290
Бренд: GE Страницы: 24
Balanced Body Allegro How To Assemble preview
Allegro
Бренд: Balanced Body Страницы: 3
MagCore Plus II Troubleshooting Manual preview
Plus II
Бренд: MagCore Страницы: 80
MagCore Plus II Service Manual preview
Plus II
Бренд: MagCore Страницы: 80
Wasp Clay Kit Original Instructions Manual preview
Clay Kit
Бренд: Wasp Страницы: 50
EuroLite SBPO-3240 Installation Instructions preview
SBPO-3240
Бренд: EuroLite Страницы: 2
Barkey plasmatherm Instructions For Use Manual preview
plasmatherm
Бренд: Barkey Страницы: 72
ABS X3S PRO Owner'S Manual preview
X3S PRO
Бренд: ABS Страницы: 17
American DJ Emerald Scan User Instructions preview
Emerald Scan
Бренд: American DJ Страницы: 8
AIRLESSCO Sure Stripe 3650 Manual preview
Sure Stripe 3650
Бренд: AIRLESSCO Страницы: 14
Civemasa GDFH Operator'S Manual preview
GDFH
Бренд: Civemasa Страницы: 55
Heitronic 35378 Installation And Operating Instructions Manual preview
35378
Бренд: Heitronic Страницы: 16
OttLite 580083 Quick Start Manual preview
580083
Бренд: OttLite Страницы: 5
Waeco ASC 6300 G Operating Manual preview
ASC 6300 G
Бренд: Waeco Страницы: 254
Bard E-Luminexx Vascular Stent Instructions For Use Manual preview
E-Luminexx Vascular Stent
Бренд: Bard Страницы: 104

Бренды по названию

Популярные бренды

Загрузить еще бренды