dbx DriveRack VENU 360, Руководство пользователя

Страница: 22 / 116

20
AES Connections Using Sample Rate Other Than 48
or 96 kHz
When connecting digital AES sources operating at sample
rates other than 48 or 96 kHz, SRC can be used to allow
such devices to be used with the VENU360. In this type
of application, you must set the VENU360’s clock source
to one of the “INTERNAL” options. SRC will automatically
be enabled, allowing the digital signal to be sample rate
converted to the internal clock frequency.
Utility Settings:
Clock Source: INTERNAL 48 kHz or INTERNAL 96 kHz
XLR 1 Input Format: AES 1&2
SRC: ON
XLR 2 Input Format: AES 3&4
SRC: ON
VENU360 Inputs
(Optional)
Analog Device
Digital Device
(Sample Rate Not 48 or 96 kHz)
AES Connections From Two Different Devices With
Independent Clocks
When two different digital devices are connected to the
AES input jacks, you will need to select one to clock to
and enable SRC for the other. In this configuration, XLR 1
and 2 must be configured for AES operation.
Utility Settings:
Clock Source: AES 1&2
XLR 1 Input Format: AES 1&2
SRC: OFF
XLR 2 Input Format: AES 3&4
SRC: ON
VENU360 Inputs
(Optional)
Analog Device
Digital Device 2
AES 3&4 (Clock 2)
Digital Device 1
AES 1&2 (Clock 1)
NOTE:
SRC is automatically enabled and the parameters become locked whenever one of the “INTERNAL” clock options
are selected. Therefore, SRC can only be changed when a setting other than “INTERNAL” is selected. This is a safety feature
that prevents improper clock source settings.
NOTE:
The VENU360 supports sample rates of 48 or 96 kHz. The AES inputs cannot sync to a clock at any sample
rate other than 48 or 96 kHz and sample rate conversion must be used with devices operating at other sample rates. When
SRC is enabled, the VENU360 supports sample rates from 32-192 kHz.