DBA LaneWalker Скачать руководство пользователя страница 53 | Manualshive

Страница: 53 / 53

DBA LaneWalker Скачать руководство пользователя страница 53

DBA LaneWalker Model C Operating Manual

·

Page 51

DBA LaneWalker



Factory-Set Conditioning

Programs and Graphs

On the following pages you will find the factory-set conditioning programs for the

LaneWalker Model “C”, along with graphs made from those programs.

Graphs have only been made for the “full run” patterns, for example those used

following a complete lane cleaning. Programs used as a suggested fill-in pattern have not
been graphed. Due to lineage variations from one center to the next, these programs will
more than likely need to be modified by each center to satisfy their specific needs.

NOTE:

These programs and the accompanying graphs are for

REFERENCE ONLY!

They are designed to be a starting point for your centers lane conditioning
procedures. It is recommended that when selecting a conditioning pattern from
these programs for the first time, you select one that is closest in distance to those
already in use in your center. Any modifications needed can be made from that
point on.

Graphs made from the same pattern may vary from one center to the next due to

type of lane finish, type of conditioner, wick break-in, etc. Therefore, to duplicate a desired
conditioning pattern from these programs, it is probable that some adjustments to wicking
pad distances may have to be made to your LaneWalker.

For best results when conditioning lanes:

CLEAN ENTIRE LANE DAILY

FILL LANEWALKER CONDITIONER TANK DAILY

TO ASSURE COMPLIANCE WITH ABC/WIBC OR FIQ RULES,

DBA PRODUCTS CO., INC. STRONGLY RECOMMENDS

THAT EACH BOWLING CENTER MAKE A GRAPH OF THEIR

CONDITIONING PATTERN WITH AN ABC/WIBC APPROVED

TAKE-UP DEVICE AND LANE READER.

DBA PRODUCTS CO., INC. ALSO MAKES NO IMPLICATION THAT

USE OF A SPECIFIC LANEWALKER PROGRAM WILL AUTOMATICALLY

PRODUCE A CONDITION IN COMPLIANCE WITH ABC/WIBC OR FIQ RULES.

«
...
51
52
53

Содержание LaneWalker






















































Отзывы:

Нет отзывов