DBA LaneWalker Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 53

DBA LaneWalker Скачать руководство пользователя страница 21

DBA LaneWalker Model C Operating Manual

·

Page 19

4. Override Auto Program

This menu allows the Supervisor to override the auto program selection and enter a

manual program selection for the current conditioning run.

To reach this menu, depress the

MENU

key until the following appears:

*OVERRIDE AUTO

PROGRAM?

To continue within the menu, depress

NEXT

. The following prompt will appear:

CHOOSE PROGRAM #

00 00

Two numbers will be displayed with this prompt, one on the lower right side of the

display and one on the lower left. These numbers refer to the last program entered. Use
the UP or DOWN ARROWS to change the program number. When the desired program
number is reached, press the

ENTER

key. If both numbers display the correct number,

press the

NEXT

key.

NOTE

:

Programs selected in the Override Menu will only override the normal Auto Program

selection for one conditioning run, whether it is the entire center or only a portion. Once all
designated lanes have been conditioned, the conditioning program used will revert back to
the Auto Program Selections.

This concludes the OVERRIDE AUTO PROGRAM menu.

5. Change Program Settings

When the Managers Password is first entered, the following screen will appear:

* CHANGE PROGRAM

SETTINGS

This menu will allow the operator to do the following:

· Change the distances of the conditioner application for each wicking pad within a selected
conditioner program;

· Choose a double oil or second run option if desired; and

· Designate whether or not the DMR duster assembly should be “On” or “Off” during each
program.

«
...
19
20
21
22
23
...
»

Содержание LaneWalker






















































Отзывы:

Нет отзывов