DBA LaneWalker Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 53

DBA LaneWalker Скачать руководство пользователя страница 22

DBA LaneWalker Model C Operating Manual

·

Page 20

Eleven factory-

preset conditioning patterns are stored in the LaneWalker’s computer

memory at the time of manufacture. These preset programs may be altered in the

CHANGE PROGRAM SETTINGS

menu. To see a sample graph of the patterns applied

by each of these programs, please see the appendix in the back of this manual.

To continue within this menu, press the

NEXT

key and the following prompt will

appear:

CHANGE PROGRAM #

00 00

Along with this prompt two numbers will appear, one on the lower left side of the

display, and one on the lower right. Both numbers will display the current program number.

To change the program number, use the

UP

or

DOWN ARROWS

. The number on

the right side of the display will change. When the correct number is reached, depress the

ENTER

key. At this time, both numbers on the display will be the same as the program

number you selected. If this is correct, depress

NEXT

.

The following prompt will appear:

RUN LINO DUSTER?

01 1-YES,0-NO 01

This screen controls the operation of the DMR Duster assembly during use of this

program number.

Use the

UP or DOWN ARROW to change the number on the left to either “00” or

“01”, then depress ENTER when the desired number is reached. “00” will turn the DMR
Duster “Off” during this conditioning run; “01” will leave it operational.

NOTE: It is recommended that the duster shut-off option be used ONLY when
conditioning freshly cleaned lanes! Not operating the duster cloth on a previously
conditioned lane has been known to cause wick contamination and poor conditioner
flow!

«
...
20
21
22
23
24
...
»

Содержание LaneWalker






















































Отзывы:

Нет отзывов