51 /87
To enable the editing of a Memory navigate with UP or DOWN keys in the sub-menus up to the
desired Memory M, keep pressing OK key until the display shows the line
Fig. 5.49 – Enable Memory editing page
Press RIGHT key to enable the editing or LEFT key to exit, if the editing is confirmed the display
shows the following line
Fig. 5.50 – Ending Editing Memory page
If editing Memory is enabled, in the first row of every menu between the brackets the edited
Memory number will be alternated with the menu ID. Changing parameters in this modality does
not influence the unit on air working mode but the parameters are saved in the Memory edited.
Pressing ESC key will exit from editing Memory state without any change in that Memory.
To save the new parameters it is necessary return in the Memory menu
Fig. 5.51 - Memory menu during editing
And keep pressing the OK key until the display shows the line
Fig. 5.52 – Confirmation editing Memory page
Press RIGHT key to confirm the saving procedure or LEFT key to discard the editing.
