40 /87
5.3.6.7
19KHZ/MPX OUTPUT SELECTION
In this menu it is possible to select the output signal at the 19KHz/MPX OUT rear connector: the
19KHz signal or the MPX Internal signal.
This option is available only in STEREO MPX Internal mode.
Fig. 5.31 – Presetting 19KHz/MPX Out menu
To change the output, press the OK key to enter the program mode (blinking arrow in second row
on the right). Press UP or DOWN keys to select the desired output. Press OK key to confirm or
ESC key to exit routine without saving.
5.3.6.8
PILOT TONE DEVIATION
In this menu it is possible adjust the deviation of pilot tone, the standard value is 7 KHz (10% of
stereo signal deviation of 71 KHz). The deviation change is obtained through an increment-
decrement of the pilot tone level.
This option is available only in STEREO MPX Internal mode.
Fig. 5.32 – Pilot tone deviation adjustment
To change the deviation value, press the OK key to enter the program mode (blinking arrow in
second row on the right). Press UP or DOWN keys to increase or decrease the deviation value.
Press OK key to confirm or ESC key to exit routine without saving.
MIN value: 2 KHz
MAX value: 15KHz
STEP: ±0.05 KHz
Table 5.10 – Pilot tone deviation adjustment permitted values
