45 /87
To change the Warning Reflected threshold level, press the OK key to enter the program mode
(blinking arrow in second row on the right). Press UP or DOWN keys to select desired value. Press
OK key to confirm or ESC key to exit routine without saving.
MIN value: 0%
MAX value: 100%
STEP: ±1%
Table 5.14 – Warning Reflected permitted values
To disable this warning set the Warning Reflected to 0%.
5.3.7.3
WARNING POWER LOW
In this menu it is possible to set a warning in case the forward power level drops below a threshold.
In case the forward power never exceeds the Warning Power Low threshold from the unit switch
ON the warning is generated after 40 seconds otherwise after 4 seconds.
The Warning Power Low threshold is indicated as percentage of nominal unit power.
Fig. 5.39 – Warning power Low menu
To change the Warning Power Low threshold, press the OK key to enter the program mode
(blinking arrow in second row on the right). Press UP or DOWN keys to select desired value. Press
OK key to confirm or ESC key to exit routine without saving.
MIN value: 0%
MAX value: 100%
STEP: ±1%
Table 5.15 – Warning power Low permitted values
To disable this warning set the Warning Power Low to 0%.
