32 /87
5.3.3.3
AUXILIARY CHANNELS
To enable the auxiliary channels (available only in STEREO mode) navigate in the sub-menu with
the UP and DOWN keys until the channel desired and press the OK key to enter the program mode
(blinking arrow in second row on the right). Press UP or DOWN keys to change the ON/OFF state.
Press OK key to confirm or ESC key to exit routine without saving.
Fig. 5.19 – Auxiliary channels options
In case one auxiliary channel is enabled the led RDS/AUX in the frontal panel will be switched on.
5.3.4
AUDIO SELECTION MENU
In the Audio Selection sub-menu the regulations of input impedance, pre-emphasis and limiter are
available.
To navigate in the sub-menu press UP or DOWN keys.
[0]
Input Impedance
[1]
Preemphasis
[2]
Limiter
[3]
Limiter Value
Fig. 5.20 – Audio Selection menu options
