DazeTechnology DazeBox C, Руководство по установке

Страница: 61 / 73

7. VISUAL SIGNALS
On the front of the wallbox are four LEDs, which serve to indicate the status
of DazeBox:
LED Colours
DazeBox
Status
Description
4 green
LEDs
Stand-by
Vehicle not connected. DazeBox ready for
connection
4 blue LEDs Charging Vehicle connected and charging
3 green
LEDs and
1 mobile
LEDs
Vehicle
waiting
Vehicle connected but not charging.
DazeBox
waits for the vehicle to
communicate its readiness to charge: the
vehicle may be fully charged or indisposed to
charge (e.g. when a delayed start charging
session has been set).
3 yellow and
1 blue
mobile LEDs Power
Management
waiting
Vehicle connected but not charging.
DazeBox has suspended the charging session
while waiting for sufficient power availability
to charge. DazeBox can signal this status if
the Power Management function has been
activated: charging will resume automatically
when sufficient current is available. For
three-phase systems: further information in
Section 7.1.
3 yellow and
1 red
mobile LEDs
Cooling
waiting
Vehicle connected but not charging.
DazeBox has suspended the charging session
due to excessive internal temperature. Further
information in Section 7.2.
3 LEDs off
and 1 blue
FW update Firmware update via App.
4 orange
LEDs Autostart
OFF
DazeBox waiting for charging to be enabled
via App.
4 red LEDs
flashing
Error
Vehicle connected but not charging, causing
error. Refer to the next table for error
diagnosis.
4 red LEDs
steady
Fault
DazeBox detects a potential fault.
ELECTRICAL DANGER: Switch off DazeBox
and contact service (see Chapter 9).
61