DazeTechnology DazeBox C, Руководство по установке

Страница: 42 / 73

system, the second one is suggested to be connected with L2-L3-L1-N of
the system and so on. This method ensures an even distribution of loads
between the phases in the system, considering that many electric vehicles
are powered by 1 phase. Using this installation method and wishing to use
DazeBox Power Management, however, some important precautions must
be considered:
▪
If more than one DazeBox is installed on the system, only one can
activate the Power Management function, any other DazeBoxes
installed downstream of the same meter must be configured to
have fixed power.
▪
If the phases are rotated, the current sensors of the Power
Management must also be connected to the same phase that
supplies the DazeBox. Example: If terminals L1-L2-L3-N of DazeBox
are connected to L3-L1-L2-N of the system, then the current
sensors of the Power Management must be connected
accordingly, sensor L1 on phase cable L3, sensor L2 on phase
cable L1 and sensor L3 on phase cable L2.
For the installation of Power Management, see the dedicated manual.
4.8. Three-phase DazeBox electrical connection on single-phase
system
The connection of the three-phase DazeBox to a single-phase system is
permitted.
For the electrical connection, follow Chapter 4.7, with the only caution being
to connect phase L of the single-phase system to the terminal marked L1 of
the DazeBox supply.
4.9. Single-phase DazeBox electrical connection on three-phase
system
The connection of the single-phase DazeBox to a three-phase system is
permitted.
42