Daytona P200T, Руководство пользователя

Страница: 16 / 60

Chapter 1 - Warnings and cautions
CAUTION
Unauthorized changes or modifications will invalidate the warranty of this device.
The manufacturer is
NOT
responsible for any interference caused by using:
l
Interconnect cables
NOT
supplied by Optos
l
Unauthorized changes or modifications to this equipment
Do
NOT
use devices which intentionally transmit RF signals (cellular phones, transceivers
or radio controlled devices) in the vicinity of this equipment, as it may cause performance
outside the published specifications, see
Recommended separation distances on page 53.
Adhering to the distance separation recommended will reduce the disturbances recorded at
the image level, but may
NOT
eliminate all disturbances, see Recommended separation
distances on page 53. However, when installed and operated as specified herein the
system will maintain its essential performance by continuing to acquire, display and store
diagnostic quality images safely.
It is recommended that the image server is not used adjacent to or stacked with other
equipment.
The use of accessories and cables other than those specified may result in degraded
electromagnetic compatibility of the system.
1.6 Cleaning guidelines
The device cleaning instructions are detailed in Cleaning on page 40. Adhere to the following cautions while
cleaning the device.
CAUTION
Cleaning patient contact parts
In order to prevent any contamination always clean and disinfect parts of the equipment
which will be in contact with the patient, see
Cleaning before each patient on page 41.
Adequate cleaning and disinfection is necessary to prevent disease transmission.
Thoroughly clean and disinfect the equipment surfaces that contact the patient and all
equipment surfaces likely to become soiled during use.
Do
NOT
attempt to wash or immerse the patient contact parts (for example, face pad and
eye piece) in water or cleaning fluid.
CAUTION
Cleaning the main mirror
The mirror can be damaged during cleaning. Preventing mirror contamination reduces the
risk of damaging the mirror. It is
NOT
recommended to routinely clean the main mirror. Only
clean the mirror if dust particles, smudges or spots have accumulated on its surface.
When cleaning the main mirror, do
NOT
rub the spots too hard, as this may cause damage.
Do
NOT
touch the edges of the main mirror. The edges of the main mirror are sharp.
Only clean visible areas of the main mirror. Do
NOT
put your hand or any cleaning material
into parts of the device you cannot see.
Do
NOT
polish the mirror surfaces; clean only dust particles, smudges or spots.
Do
NOT
wear jewelry (for example rings, watches or bracelets) while cleaning the mirror
surface as this may damage the mirror.
Dispose of the dirty cloth after each wipe to avoid transferring the dust back on to the
mirror. You will have to use several wipes to clean the mirror.
Page 16 of 60
English
Part Number:
G102748/11_ENG
Copyright
2021
, Optos plc. All rights reserved.