Daytona P200T, Руководство пользователя

Страница: 28 / 60

Chapter 3 - How to...
starts up.
l
The status lights on the front of the scan head cover will flicker and then settle on the green
light.
l
The touch screen powers up.
4. The scan head takes less than five minutes to start up, please wait for the scan head to start up. The
following happens during start up:
l
The system will run a series of self-tests during this time.
l
The status indicator will be purple while the self-tests are running.
l
The imaging procedures will be available when the self-tests have completed and the status
indicator is green.
5. Enter your username and password on the touch screen when prompted. Usernames and passwords
are assigned by your System Administrator, see Managing user details on page 36 (all passwords are
case sensitive).
Note
l
If there is a network error when starting the scan head it is likely that there is a temporary problem
with the image server. You can attempt to clear problems by restarting the image server, see
How
do I restart the image server? on page 46.
l
You will be unable to capture images if the self-tests have
NOT
been successful. Please restart the
scan head. If the problem persists please contact your Optos representative, see Contact us on
page 55.
3.1.1.3 Switch on browser-based review clients
Captured images can be reviewed using the Optos Advance software. You need to login to Optos Advance to
access the patient details and images stored on the system.
Browser-based review clients have to be on the same network as the scan head and the image server.
Usually, browser-based review clients have been logged off at the end of each day. To login to a browser-
based review client:
1. Press [Ctrl]+[Alt]+[Del] to display the Unlock Computer dialog box.
2. Type your username and password. Select OK .
3. Connect to the Optos Advance URL from your browser.
4. Enter your username and password when prompted. Usernames and passwords are assigned by your
System Administrator, see Managing user details on page 36 (all passwords are case sensitive).
3.1.2 Switch off at the end of each day
The system
MUST
be closed down properly at the end of each working day, see Shut down the scan head on
the facing page.
Note
l
You should follow the correct procedure in order to protect the integrity of the information on the disk
drives.
l
You should back-up your image server data at least once a week.
Page 28 of 60
English
Part Number:
G102748/11_ENG
Copyright
2021
, Optos plc. All rights reserved.