daviteq Lidar People Counter, Руководство пользователя

Страница: 92 / 93

- After the installation is completed, the excavated soil is backfilled in order, layered, and compacted, and
horizontal installation is guaranteed.
3-layer measurement 6-layer measurement
No. Phenomena Reason Solutions
1
The measured value is
not within the expected
value.
1.1 The soil is not compact.
Make sure the soil is compact and
there are no air gaps between the
soil and electrodes
1.2 The soil is special
Calibrate or adjust the reading
values on software or reading device
based on the actual values of that
soil.
1.3 The sensor was spoiled.
Please consult the manufacturer for
a warranty or replacement.
2
The measured values of
EC, Salinity, and NPK are
always zero or near zero.
2.1
The soil moisture is too low, less
than 20%. Therefore the circuit
cannot measure the electrical
conductivity of the soil
Watering the soil and/or keep
holding the last values of EC,
Salinity, and NPK in the Software
system or reading device.
2.2 The sensor was spoiled.
Please consult the manufacturer for
a warranty or replacement.
3 HW_Error = 1 3.1
Loosed connection of sensor probe
and wireless transmitter.
Check the sensor cable and
connector.
3.2 The sensor probe got a problem.
Please consult the manufacturer for
a warranty or replacement.
6. Troubleshooting for the Daviteq SMT Soil
Sensor
7. Maintenance of the Daviteq SMT Soil Sensor