daviteq Lidar People Counter, Руководство пользователя

Страница: 15 / 93

- For NH3 Odor detection in the toilet, users can place the sensor from 1.6m on the wall or on the ceiling which a height
<= 2.6m
Step 1. Prepare the rain guard.
Step 2. Insert rain guard to the sensor filter and tighten
the locking screws
No. Phenomena Reason Solutions
1
The measured value is
not within the expected
value.
1.1 The sensor is drifted by time. Re-calibrate the sensor
1.2
The sensor was in a high humidity
environment (> 90% RH) for more
than 03 days continuously.
Place the sensor in low humidity for
its recovery. It may take up to 30
days to recover. If the sensor cannot
recover after 30 days, please replace
the new sensor module.
2
The measured value is
always zero or near zero.
2.1 The sensor module was removed. Please check the sensor.
2.2 The sensor is at the end of its life. Replace the sensor module
3 HW_Error = 1 3.1
Loosed connection of sensor
module and wireless transmitter.
Check the internal wiring.
3.2
The measuring module got a
problem.
Please consult the manufacturer for
a warranty or replacement.
Note for Outdoor installation: For outdoor installation, please use the Rain guard to protect the sensor from
raindrops or snowflakes. Please find below the steps of installation
6. Troubleshooting for the Daviteq G4 Gas Sensor