DAVIS TMS-5500-SL, Руководство пользователя

Страница: 23 / 48

Small Corrections Only RPM:
(default (75-85%)
The percent of Max engine RPM at which the unit
makes only small corrections can be set by the user.
Some users may want the unit to make smaller
corrections after a certain RPM while others may
want the unit to be able to make full corrections for
more of the strait. Once set the value will remain
until changed by the user. The RPM is set in a % of
the maximum RPM turned at the end of the strait.
(example 75% of 8000 rpm = 6000 RPM). To change
the Small Correction Only RPM value, follow these
steps.
1.
Set the “M” dial to “8”
2. Hold down the “Test” button
3. Turn the power On
4. While holding the “Test” button down, move
the “Mode” dial to the first digit of the desired
Ending RPM %.
(example- 75 % - first digit=7 / 80 % - first digit =8)
5. Release the “Test” button,
The led will flash to show the value has been
accepted.
6. Now move the “M” dial to the second digit of
the desired Ending RPM %, then press and
release the “Test” button.
(example- 75 % - sec. digit=95 / 80 % - sec. digit =0)
The led will flash to show the value has been
accepted.
After about 1 second the LED will Blink to show the
value that the Ending RPM is set to. The first digit is
output followed by a short pause, then the second
digit is output.
(75% = 7,5 Blinks) (zeros are indicated by shorter
blinks)
21
Davis Technologies TMS-5500-SL Elec Points
www.moretraction.com