19
Temperature Management Devices
Your Microlene UV Disinfection System is designed to run continuously to ensure
optimal disinfection. However, during periods when no water is drawn through the
system, the energy from the disinfection process can cause the temperature of the
water inside the chamber to rise. In extreme situations elevated water temperature or
the fluctuation in temperature can lower the output of the UV lamp. In these cases, or
if the elevated water temperature is a nuisance, Microlene recommends one of the
following forms of temperature management devices.
Cooling Fan
The fan runs continuously to cool the water by forced convection. The
long-life fan is powered independently using a compact modular power
adapter that operates from 90-265V (47-63Hz). Order PN
DM130014.
Temperature Relief Valve (TRV)
On reaching a higher temperature, the TRV is designed to drain
a small amount of water to allow fresh, cooler water to enter the
system. The TRV works without power and comes complete with 10’
of drain line. Order PN
DM130033
for 1” ports and PN
DM130034
for
1 1/2” ports.
Expansion Modules
Controllers incorporate an “
Infinite Expandability Port
” (
IEP
) which allows for expansion
to the UV sensor and all other modules. Each module (including the sensor) comes
with both a male and female connection. Connect any device to the controller and all
subsequent devices are then connected into the female end of last device added in a
“daisy chain” configuration. The UV sensor must only be supplied at SELV.
