14
Operational Screens
On systems without the UV monitor, the default screen shows the
Microlene Home
Screen
. At any point during operation the user is able to scroll through the
Microlene
Home Screen, Lamp life remaining
,
QR Code, Contact Info and Maintenance
Parts
screens by pressing the button located on the front of the controller.
On systems with the UV monitor, the system will display the same screens except the
UV Intensity replaces the home screen. The UV Intensity screen displays the level of
UV light detected by the sensor. UV intensity can be affected by poor water quality,
scaling on the quartz sleeve and/or sensor, lamp failure or lamp expiring. The following
screens show the UV Intensity dropping.
Below 56%, the numbers and warning sign turn red and an audible chirp is
given by the ballast every 15 seconds. Below 51%, the screen is solid red
and a constant audible alarm is given. This alternates with a screen indicating
“water may be unsafe for consumption”. If you have a solenoid module
the controller de-activates the solenoid valve, shutting off all water flow.
audible chirp every
15 seconds
audible chirp every
15 seconds
constant audible
alarm
cycles with red low
uv screen
