Datex-Ohmeda Anesthesia Delivery Unit S/5, Техническое справочное руководство

Страница: 37 / 494

Installation instructions
Document No. 8502852
4-1
4 INSTALLATION INSTRUCTIONS
WARNING The installation of the ADU must be done by properly trained and authorized
technical personnel.
Introduction and requirements
The ADU is manufactured according to your order.
The ADU must be connected to mains electrical power and gas supplies as specified in the
”Technical
Specifications” section .
The installation of the ADU must be done by properly trained and authorized technical personnel
according to these instructions. Use the “Installation Check List ” as a guide to ensure all steps are
completed. The list is located in the “Forms” section.
The installation steps are:
1.
Setting up the unit
2. Connecting the monitors
3. Configuring the software
4. Performing the functional check
How to use these installation instructions
These instructions provide the information needed to set up the Anesthesia Delivery Unit after
unpacking. They also state the basic information on configuring user default settings and interfacing
other equipment.
For information on how to use, clean and check the unit, or how to connect the patient circuits, please
refer to the User’s Reference Manual provided.
NOTE: The frame options and products specific to the ADU, are all listed in the ADU System Guide.
Please check the System Guide for relevant order codes and compatibilities.
Setting up the ADU
Unpack the unit according to the “Open me first” instructions located in the delivery package. The
“Open me first” package includes unpacking instructions and the “ADU Production Card” , which must
be saved in your device history records. The Production Card includes for example, all the necessary
order, version and serial number information. Check that the unit corresponds with the original order.
If the ADU temperature is outside the specified operating temperatures, the unit must be warmed up
or cooled down to normal operating temperature before use. For example , the unit requires 2 hours
typically, to warm up from 0 ° C to 20 ° C. The unit may be moved on its four castors (wheels) to be
placed in an optimal position. The front castors may be locked.
The ADU is delivered without the local of type of connectors for the gas hoses. The connectors must
be attached to the hoses with a crimping tool.