1 DATECS
LP-50
8
WARNING
y
Never handle the equipment in the following manners, as it may break, become out of
order, or overheat causing smoke and resulting in fire or electric shock. If the equip
ment is used in an abnormal condition, such as when broken, then problems, smoke
emission, abnormal odor/noise, and fire can result. If an abnormal condition exists, be
sure to disconnect the power plug from a plug socket, and contact our dealer. Never
repair the equipment on your own – it is very dangerous.
y
Do not allow the equipment to receive a strong impact or shock, such as
kicking, stomping, hitting, dropping, and the like.
y
Install the equipment in a well-ventilated place. Do not use it in such a manner
that its ventilation port will be blocked.
y
Do not install the equipment in a place like a laboratory where chemical
reactions are expected, or in a place where salt or gases are contained
in the air.
y
Do not connect/disconnect a power cord or a data cable, while holding
the cable.
y
Do not pull, install, use, or carry the equipment in such a manner that force will
be applied to the cables.
y
Do not drop or insert any foreign substances, such as clips or pins, into the
equipment.
y
Do not spill any liquid or spray any chemical-containing liquid over the
equipment. If any liquid is spilled on it, turn off power, disconnect the power
cable and power cord from the plug socket, and contract our dealer.
y
Never disassemble or remodel the equipment. Negligence of this may cause
fire or electric shock.
y
Use the equipment only with the specified commercial power supply and DC/AC
adapter. Negligence of this may result in fire, electric shock, or problems.
y
If you drop or break the AC adapter, or if water or the like gets inside it, unplug
it immediately from the socket and contact your dealer.
y
Do not damage, break, process, bend/pull by force, twist, or head an DC/AC
dapter cord. Also, do not put a heavy substance on it or heat it. The DC/AC
adapter cord could be broken, resulting in fire, electric shock, or trouble. If the
C adapter cord is damaged, contact our dealer.
y
Do not connect/disconnect the DC/AC adapter with wet hands.
y
Do not overload a single electrical outlet, using a table tap or a current
tap socket.
y
An equipment packing bag must be discarded or kept away from children.
A child can suffocate if the bag is placed over the head.
!
Содержание LP-50
Страница 1: ...1 DATECS Bulgaria User s Manual LABEL PRINTER MODEL LP 50...
Страница 4: ...1 DATECS LP 50 4...