Datecs LP-50, Руководство пользователя

Страница: 46 / 51

1 DATECS
LP-50
46
4.8. Print
Printing a label
The command initiates the printing out of the contents of the
printer’s graphic buffer. After the completion of this action it is
automatically cleared
and ready for generating a new label.
After the end of the printing session the last label is pushed
out of the printer in away so that it is completely visible and
ready for use.
Format: P[m,]n
m The number of identical labels which will be printed
out. The entering of a value greater than 1 is an option
when working with a form, which uses counters.
After
printing a certain number of labels the counters
automatically change their values according to the
rules set when they were defined and the new group of
labels is printed with the new values.
Possible value: 1 - 1000.
n The number of absolutely identical labels for print. The
sum quantity for this command will be
m*n . Possible
value: 1 - 1000.
The command with only one parameter is used for printing a
label resulting from command, directly sent to printer. The
active form is ignored. The parameter indicates the number of
identical labels demanded.
Example: P2,3
This command will print 6 labels of which the second 3 will
have new counter values.
Resuming interrupted printing
If the last printing command has been completed
successfully the command will activate no action on the part
of the printer.
If, however, the last printing session has been interrupted you
may activate its continuation from the point of interruption in
order to get the required number of labels.
Format: PC