1 DATECS
LP-50
18
3
3
3
3
3
Designing the appearance of the label. Setting the elements, which
will not be subject to changes - they will need no counters or variables.
3
3
3
3
3
Setting and defining the elements subject to changes for each
label. When some of them are whole numbers and will change at regular
rates a counter may be defined for them. The rest must be variables.
Depending on the case in question the information on a given inscription
or bar code may be set in several different variables and/or counters.
3
3
3
3
3
Defining variables and counters includes an assessment of their
maximum possible length, alignment if and when the text is shorter than
the maximum length, rate of growth of the counters. The selection of the
initiating text is important too if it is not informative operating with the forms
later on may be difficult. A line with the command “V” or “C” is added in the
text file for each counter or variable.
3
3
3
3
3
If we wish to insert graphics in the label, we must select a name and
position for this element and add a command for its layout in the text file
(GG). The PCX file must be prepared in advance on a PC and loaded into
the printer prior to the execution of the form. Before sending it to the printer
its length must be verified and noted because the loading command GM
will demand this information. One possible way for doing this is by sending
the file from a terminal program with the DOS command COPY FileName
COMn: /B (sending the file as binary in this case is obligatory) - “n” is the
number of the serial port.
3
3
3
3
3
Selecting the position, font, size and orientation of the inscriptions
on the label. “A” commands are added for this purpose and if necessary,
the inclusion of text modifiers for the counters and the variables for
receiving the necessary strings for printing.
3
3
3
3
3
Selection of the type, position, size and orientation of the bar codes
- if there will be such - where modifiers may also have to be used.
3
3
3
3
3
If drawing of lines and frames is needed the following commands
may be added - LE, LO, LW, X.
Содержание LP-50
Страница 1: ...1 DATECS Bulgaria User s Manual LABEL PRINTER MODEL LP 50...
Страница 4: ...1 DATECS LP 50 4...
