Datecs LP-50, Руководство пользователя, Страница: 42 / 51

1 DATECS
LP-50
42
4.5. Working with graphic files
Loading a new graphic
Saves a new graphic file in the memory of the printer. The
rules concerning names are the same as with the forms. The
command will be rejected if there is a graphic file of that
name or the entered size of the file is greater than the size of
the free operational memory. The file must be in the PCX
format, monochrome - in any other case it will not be loaded.
It can be produced in different programs under Windows - for
example
PhotoShop .
Format: GM”Name”,n
Name: The name under which the graphic file will be
saved in the memory of the printer.
n The length of the file (not more than 32768 bytes).
After the command the set quantity of bytes must
be sent to the printer.
Example: GM”Logo1",3530
The saving of a graphic file under the name “LOGO1” will
begin (with a length of 3530 bytes).
Drawing out of a graphic file
The command starts the printing of a graphic file, stored in
the buffer of the
printer under that name.
Format: GGa, b, “Name”
a X coordinate of the upper left corner of the graphic
image (0 - 2047)
b Y coordinate of the upper left corner of the graphic
image (0 - 4095)
Name: Name of the graphic file
Example: GG20,150,”Logo1”