4
Note:
If the code table is selected using the DIP switches, ESC t command is disabled and the
code table cannot be changed by a command.
In the Chinese version of the printer only Sw8 is defined for changing the code table:
Sw6
Sw7
Sw8
Code page
N/A
OFF
USA CP437
N/A
ON
Chinese GB2312
In the Arabic version of the printer only Sw8 is defined for changing the code table:
Sw6
Sw7
Sw8
Code page
N/A
OFF
USA CP437
N/A
ON
Farsi Code Table
Serial Interface Cable Attachment
Turn off the printer before attaching the cable. After connecting the connectors screw the two
screws.
Serial Interface
Baud rate
1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps
Serial port parameters
1 start bit, 8 data bits, 1 stop bit, no parity
Signal characteristics
RS232C
Mark – logical 1 (-3V до –12V)
Space – logical 0 (+3V до +12V)
Input-output Signals
RD
Serial input data signal
TD
Serial output data signal
GND
Ground
Signal Description
1. Start bit
One “Space” level bit. Indicates the beginning of data byte.
2. Data bits
Eight consequent bits. First is the least significant bit.
3. Stop bit
One “Mark” level bit. Indicates the end of the byte.
