20
16 Windows Greek (CP1253)
17 Windows Turkish (CP1254)
18 Windows Hebrew (CP1255)
19 Windows Baltic (CP1257)
20 West Europe Latin I + Euro (CP858)
21 Central Europe Latin II + Euro (CP852 + Euro)
22 R Euro (CP808)
23 T Euro (CP857 + Euro)
In the Chinese version of the printer one of the following supported code tables is selected
according to the value of n:
n
Code Table
0
USA (CP437)
1
Chinese GB2312
[Caution] In the international version of the printer when the code page is set by the DIP switches the
command is disabled and a code page other than this one cannot be set.
In the Chinese version of the printer the code table can be changed regardless of the DIP switch
setting.
Code pages 20, 21, 22 and 23 (CP858, CP852 + Euro, CP808 and CP857 + Euro) are not hard-
coded code pages, i.e. they do not have the Euro Symbol built in. They are produced by giving the
Euro symbol position the proper value. If ESC # is used with some of these pages the Euro symbol
position will be changed, i.e. it will not appear twice.
Even if the code page is set by the DIP switches the command ESC > will store this code page into
the flash for further use.
The command <ESC t 14h> is equal to the combination of commands <ESC t 02h> + <ESC #
D5h>.
The command <ESC t 15h> is equal to the combination of commands <ESC t 06h> + <ESC #
AAh>.
The command <ESC t 16h> is equal to the combination of commands <ESC t 07h> + <ESC #
F2h>.
The command <ESC t 17h> is equal to the combination of commands <ESC t 08h> + <ESC #
D5h>.
[Default] The default value is 0 – USA CP437 code page.
44. ESC v
Transmitting the printer status
[Code]
[1Bh] + [76h]
[Outline] Current printer status is transmitted..
Status sent out consists of 1 byte whose content is as in the table below.
Bit
Function
Value 0
Value 1
0
Not defined
1
Not defined
2
Paper end
With paper
Without paper
3
Head temperature
Normal
Overheated
4
Not defined
5
Auto cutter state
No cutter error
Auto cutter error
6
Not defined
7
Not defined
