Datcon DT9102 B, Руководство по эксплуатации

Страница: 47 / 60

DT9102 B
10.5. Description of the menu items
You find a description of the menu items in the following
part. A description on the handling of the menu is in
Chapter 7. Setting up.

The setting of the time ( Se c null)
You can set the seconds to zero to set the exact time or
you can set the hours and the minutes by increasing or
decreasing selected digits.
 Time set ( Ti me)
You can set the hours and the minutes by increasing or
decreasing selected digits.

Changing the User Code ( U ser C ode)
The new User Code must be typed in twice in order to
avoid any typing errors. The mnemonic

( R e- Typ e)
warns you to type the code for the second time, after you
have typed it once. If the two codes are not identical with
each other, the mnemonic

( Bad C ode) appears on
the display and the instrument exits the menu item.
Make sure that you do not forget the User Code, otherwise
a new one can be defined only if you enter the menu by a
Supervisor Code [Default factory setting: 0000]

Use supervisor
code
Synchronisation mode ( S ynchron M ode)
The setting of the remote synchronisation mode.
Modes:

= non active

= rounding the seconds down or up

= synchronisation to a preset time written in the

menu item (here you can set hours and minutes,
the seconds are set to zero automatically).
20180905-V1
47