Datcon DT9102 B, Руководство по эксплуатации

Страница: 28 / 60

DT9102 B
7.3. Second clear (01. menu item)
Function Set the seconds of time to zero, and round time.
If the moment of button pressing the second was between
0 and 29, the hour and minute not changing.
If the moment of button pressing the second was between
30 and 59, the minute rounding up (if necessary the hour
too).
Sequence of operations 1. Enter the menu by the user or the supervisor code.
Chapter 7.1. Type in the code (password) describes how
you can it. You will see on the display:

.
2. Enter this menu item by the ENTER button.
3. You will see the mnemonic

on the display for 3
seconds, the time appears in MM.SS format. The decimal
point is blinking per second.
4. Press the ▲ button to set the seconds to zero.
Seconds are rounded down between 0 and 29 and rounded
up between 30 and 59.
5. Press MENU button to set the time (if there is no need to
set seconds to zero).
Exit from the menu item 1. After finishing the settings, press the MENU button to
exit the given menu item, and will you see:

.
(2. If you want to change the settings you have just done,
or if you just want to check what you have typed in, go on
with the operation from point 2 of the
Sequence of
operations .)
(3. If you don’t want to exit the menu (you want to make
further settings), then you may select the desired menu
items by pressing the ▲ button.)
Exit from the menu
1. Press the MENU button. First the mnemonic

( Save ), then the mnemonic

( Exit ) are shown on the
display. With that, the storing of the settings is completed.
The instrument has exited the menu and goes on with the
measurement.
28
20180905-V120180905-V1