45
MATTE Key Functions
Matte option allows the user to configure the matte. The configuration steps are described below:
8.
Click the
Matte
button on the
MENU SELECT
panel
9.
The
Bus Matte
parameters are shown at the bottom of the screen.
10.
Locate
Color Palette
which
allows selection of a color for the Bus Matte.
11.
Click on the Color Palette and the crosshair to display the currently selected color with its RGB values
shown on the right.
12.
The Luma value
determines how bright or dark the selected color or hue is. The
Luma
value can be
adjusted by the
Luma Function keypad
.
13.
The Sat or Saturation value
moves the crosshair from the center of the color palette to the outer edge.
The
Sat
value can be adjusted using the
Sat Function Keypad
. If the
Hue
angle is set to 180 degrees then
the
Sat
value determines how much Cyan is in the matte.
14.
The Hue parameter
moves the crosshair around the color palette in the clockwise or anti-clockwise
direction. The Hue value/angle can be adjusted using the
Hue Function dial
.
15.
Certain color hues can be found at certain angles on the color palette. For instance, Red is 0 degrees
(12 o’clock position), Green is approximately 120 degrees (4 o’clock position) and Blue is approximately
240 degrees (8 o’clock position).
