44
NVS-30 errors
When a streaming or recording error occurs, the LED illuminates on the NVS-30
device. Unless you receive a pop-up error when using the buttons in the Command
Center’s
Control
page, the error will be logged in the
Messages
section (
Status
page).
Note: An error will not be reported if the audio connected to the NVS-30’s analog
audio input is lost or missing. If this occurs, the stream and/or recording continues
but will not contain audio.
Viewing and clearing errors
Streaming and recording errors that do not appear as a pop up error on the
Control
page are instantly logged in the
Messages
section of the
Status
page.
The
Status
page displays the errors pertaining to that NVS-30 device only.
To monitor streaming and/or recording when controlling multiple devices, we
recommend that you open the Command Center for each NVS-30 device.
When you click the
Clear messages
button on the
Status
page, the logged errors are
deleted from the list and the LED turns off. The LED will also turn off if you
successfully start a new stream and/or recording.
Note: Powering off or resetting the NVS-30 will clear all errors from the device.
Содержание NVS-30
Страница 1: ...1...
Страница 53: ...53 sudo nfsd restart 8 Press ENTER 9 Close the Terminal window...
Страница 55: ...55 Appendix 6 Dimensions All measurements in millimeters mm...
Страница 59: ...59 Service and Support...
