37
By default, the device name is set to
NVS-30
. You can give a unique name to each
NVS-30 device for easy identification within the Command Center and the Datavideo
Utility Software. This is especially useful when you have multiple NVS-30 devices on
the same network. To change the name of your NVS-30, type the desired name in
the
Device name
box, and then click
Change
.
By default, the NVS-30 username and password are set to
admin
. The device
username cannot be changed, however, we do suggest that you change the device
password. To change the NVS-30 password, enter the current and new passwords
and then click
Change
. For information on resetting the password to factory default,
see Chapter 6 “Reset to factory defaults”.
4.4.2
Date and Time
The
Date and Time
page in the Command Center allows you set the date and time
for your NVS-30 device. You can set the date and time manually or automatically by
using an NTP server. The date and time are used in the naming of the recorded files.
Note: To save changes made in the
Date and Time
page, you must click the
Apply
button. An NVS-30 hardware reboot is required to apply the changes. If you leave
the
Date and Time
page before clicking
Apply
, all changes will be lost.
Accessing the Date and Time page
To access the
Date and Time
page, open the Command Center, and select
Device >
Date and Time
.
Содержание NVS-30
Страница 1: ...1...
Страница 53: ...53 sudo nfsd restart 8 Press ENTER 9 Close the Terminal window...
Страница 55: ...55 Appendix 6 Dimensions All measurements in millimeters mm...
Страница 59: ...59 Service and Support...
