Datavideo NVS-30, Инструкция по эксплуатации

Страница: 36 / 59

36
When entering the path and filename, you must enter the IP address of the location
on the network to which you want to record, followed by the full path to the shared
folder from the root directory, and then the base name for the file in the following
format:
//IP address:/full path to shared folder/basename
For example, if you want to name your file Recording1 and save the file to a shared
folder named Files that is located on the Desktop under Datavideo in the Users root
directory folder on a network computer with an IP address of 123.456.7.890 , enter
the following:
//123.456.7.890:/Users/Datavideo/Desktop/Files/Recording1
Tip: You can obtain the full path to the shared folder by right-clicking the folder,
and then clicking Get Info.
Domain, username, and password
When recording your source input to a network location and if the NVS-30 is not on
the same domain as the network, enter the network domain. If required, also enter
the
Username
and
Password
that is used to access the network.
5.4 Device
Under the
Device
tab, you will be able to gain access to the following pages:
• Account
• Date and Time
• Automatic Configuration
•
IP Setup
The subsequent sub-sections will provide an outline of the settings on these pages.
4.4.1 Account
The Account page in the Command Center is where you give a descriptive name to
your NVS-30 device and change your NVS-30 password.
Accessing the Account page
To access the Account page, open the Command Center, and select Device >
Account
.