Datavideo HS-2200, Инструкция по эксплуатации

Страница: 10 / 48

10
DC Input
Connect the supplied 12V 5A PSU to this 4pin XLR socket.
Pin 1 = GND ( - )
Pin 2 = NC
Pin 3 = NC
Pin 4 = VCC ( + )
Fast Start Switcher DIP Switch
For Firmware Upgrade , push both DIP switches up.
For Switcher Fast Start, push both DIP switchers down.
Service Port
This RJ45 Ethernet port is used for updating the HS-2200
firmware, or uploading logo image.
HDMI Multi-View Outputs
HS-2200 is capable of achieving multi-view monitoring by
connecting multi-view monitor to the HDMI port. The HDMI
output can be used for monitoring video and audio in a
number of different configurations.
The HDMI connectors are located on the rear panel.
Note: HDMI multi-view output format is 1080i.
SDI Video Outputs
The five BNC output connectors are user defined SDI outputs. Each of these SDI outputs has the option
to be:
1. Program
2. Program logo free
3. Program logo & titles free
4. Preview
5. Aux1,2,3 or 4
6. Multi screen
Note: Please enter the HS-2200 MENU to set the OUTPUT SOURCE .