Datavideo HS-2200, Инструкция по эксплуатации

Страница: 36 / 48

36
Change the SDI Embedded Audio setting in the switcher’s menu system to show a value of Group 1 and
Pair 1. Press the ENTER key to store the audio values chosen for each video input.
Now exit the menu by pressing any wipe key and look at the AUDIO FIXED button in the wipes area of the
keyboard.
Select the AUDIO FOLLOW VIDEO status with this button when looking at the status area of the HDMI
multi-view. The button will be off. The status area is located just below or near the Preset image on the
HDMI multi-view monitor.
When switching between the video sources the audio sources will also change. We can choose how the
audio will change sources, whether it is a clean cut (immediate switch) or some sort of transitioned change
(cross fade or fade out & in). To do this we would need to set up with the following menu options.
Auto Audio Mixing Type User choice of
X type or V type
Tick selection
X type = A/B cross fade
V type = Fade out A then fade in B
T-Bar Audio Mixing Type Tick selection of
Follow auto audio mixing type (use above option)
By the end (clean cut or immediate audio switch)