24
Press both the Record and Play/Pause Buttons simultaneously and the DN-500 should start recording.
+
The counter should start counting and the REC
symbol should appear
If it does not start recording check the following:
There is an analogue video input present.
The Analogue Input Button is illuminated
The DN-500 Record Format is set to RAW DV (DV), not M2T (HDV)
see Record Formats Menu.
The track you have selected on the DN-500 is empty. The counter next to the TrackNo. on the LCD display
should be showing 00:00:00:00.
There is some available space on the DN-500 Hard Disk - Go to the FREE SPACE Menu and check that the
DN-500 is not full.
N.B. When the DN-500 is set to output channel 63 you cannot playback a track to analogue outputs,
until the connected DV device (camera, mixer etc) is switched off or disconnected. See Set output
channel menu.
During record you can pause the DN-500 by pressing the Play/Pause button, the counter on the LCD display
will stop.
The counter should stop counting and the REC PAUSE symbol
should appear
To release pause press the Play/Pause button again.
The counter should start counting again and the REC symbol
should return
N.B. It is not possible to stop recording and then restart on the same track, once a track has been
stopped you must select a new empty track from the DN-500 to start recording again.
For details of playback please see
Playing a DV Track on page 21.
