13
Press the FWD (
►►
) Button to select either PAL or NTSC
To confirm your selection and exit the menu press the Next (
▲
) button.
Then press the Menu Button to leave menu mode
NTSC Setup Level Menu
The NTSC Setup Level Menu sets the DN-500 either 0 IRE or 7.5 IRE.
This is not necessary for PAL
inputs
. 7.5 IRE is most commonly used in the U.S.A. and Canada and 0 IRE in far eastern countries such as
Japan. If you are unsure which to set, please consult your dealer.
To select the NTSC Level:
Press the Menu Button, to enter menu mode
Press the FWD (
►►
) Button to navigate the menus until NTSC SETUP LEVEL is displayed
Press the Next (
▲
) Button to enter the NTSC level set up menu
Press the FWD (
►►
) Button to select either 0 IRE or 7.5 IRE
To confirm your selection and exit the menu press the Next (
▲
) button.
Then press the Menu Button to leave menu mode
