12
Record Formats Menu
The Record Formats Menu sets the recording format of the DN-500, you can choose between RAW DV
(.DV) or M2T (HDV).
Raw DV can be recorded from a DV deck, camcorder, vision mixer with IEEE-1394 (iLink, FireWire, DV)
output, or from an analogue video signal (Composite (CVBS), S-Video (Y/C), Component (YUV (YPbPr)).
M2T (HDV) can only be recorded from a camcorder, deck with an HDV signal via IEEE-1394 (iLink,
FireWire),
it is not possible to record or play M2T files from an analogue connection on the DN-500
.
N.B. To view recorded M2T files set your HDV Camcorder / Deck to Recorder Mode. The DN-500 M2T
files can then be played back to the camcorder viewfinder / monitor.
To select the Record Format: Press the Menu Button, to enter menu mode
Press the FWD (
►►
) Button to navigate the menus until RECORD FORMATS is displayed
Press the Next (
▲
) Button to enter the RECORD FORMAT set up menu
Press the FWD (
►►
) Button to select either RAW DV (DV) or M2T (HDV)
To confirm your selection and exit the menu press the Next (
▲
) button.
Then press the Menu Button to leave menu mode
Input Video Standard Menu
The Input Video Standard Menu sets the DN-500 to receive either
NTSC
or
PAL
video signals.
To select the Input Video Standard:
Press the Menu Button, to enter menu mode
Press the FWD (
►►
) Button to navigate the menus until INPUT VIDEO STANDARD is displayed
Press the Next (
▲
) Button to enter the INPUT VIDEO STANARD set up menu
