USAGE
POWERLINK is used with the SMARTPAX
QC control unit in the Dataton system.
To connect POWERLINK to a SMARTPAX
QC, use the enclosed cable, 3443
SMARTBRANCH FIRST CABLE. The
snaplock connector plugs into a SMART-
PAX QC port. The modular connector
goes to the IN port on the POWERLINK.
CONNECT MORE UNITS
To connect additional POWERLINK units
on the same SMARTPAX QC port, use
the enclosed black cable, 3444 SMART-
BRANCH LINK CABLE.
This modular/modular
cable goes from the
OUT
port of the first
POWERLINK, to the
IN
connector on the second unit. In this
way, you can run up to four POWER-
LINK units from the same port. The green
LED adjacent to the IN connector indi-
cates that the upstream data connection
is functioning. When this LED flickers, it
is an indication of normal data transmis-
sion between units.
You may mix POWERLINK and KEYLINK
units on the same SMARTPAX port. The
remaining ports may be used to control
more POWERLINK or KEYLINK units, or
unrelated media devices as required.
Please note: You may connect a maxi-
mum of eight POWERLINK units to a sin-
gle SMARTPAX QC. This is due to power
supply constraints; operating power for
POWERLNK is entirely supplied by
SMARTPAX QC. If your installation calls
for more than eight POWERLNK units,
distribute them on more than one
SMARTPAX QC unit, in order to ensure
reliable operation.
INSTALLATION HINTS
POWERLINK units may be rack mounted
by means of 3450 ONE U RACK BAY.
This is usually the most suitable way to
mount units in fixed installations.
3443 SMARTBRANCH
FIRST CABLE
3341
SMARTPAX QC
3444 SMARTBRANCH LINK CABLE
DT-960301
DATATON TRAX
Version 3.0
Personalized for
James Bond
' Dataton AB
1996, all rights
reserved.
Use of term in this
software should
not be regarded as
affecting the
validity of any
trademarks or
service mark.
LO LEVEL IN
HI LEVEL OUT
LO LEVEL IN
HI LEVEL OUT
LO LEVEL IN
HI LEVEL OUT
LO LEVEL IN
HI LEVEL OUT
Multiple
POWERLINK
hook-up
OUT
IN
SMARTBRANCH™ BUS
PR SH power2Fkeylink 99-04-09 11.11 Page 2
