DSV2+
Turbo
User Manual, Version 1.09
15
Copyright
©
2006 by Datastrip, Inc. All rights reserved.
Reproduction in whole or in part is prohibited.
6. Basic Operation
The following sections describe some of the features and functions that are available on the
DSV2+ family of products.
6.1 System Startup Sequence
•
To begin operation, press the
Power
button (located under the Function Keys) and hold
down until one beep is heard. Release the button (two more beeps are heard).
•
The unit takes approximately 30 seconds to boot as diagnostic testing is performed. The
display will indicate that the system is booting.
•
When the unit powers up, the Windows CE.NET desktop will appear on the display.
6.2 Stylus
The DSV2+ provides a stylus to use with the touch screen for selecting items and entering
information (the unit may also be operated with a standard USB mouse). The DSV2+ stylus is
stored in the bottom end cap of standard units and in the Dual Grip Battery Cover for units that
have that option installed. The following actions are available with the stylus:
•
Tap –
Lightly touch the screen once with the stylus to open items and select options.
Tapping is equivalent to clicking an item with the mouse on your personnel computer.
•
Double-Tap –
Lightly touch the screen twice with the stylus to open folders and
applications. Double-Tapping is equivalent to Double-clicking an item with the mouse
on your personnel computer.
•
Drag -
Hold the stylus on the screen and drag it across the screen to select text and
images. Drag within a list to select multiple items.
•
Tap-and-hold
- Tap and hold the stylus on an item for a short period until a menu
displays a list of actions available for that item. Tapping and holding is equivalent to
right-clicking your personnel computer mouse button. When you tap and hold, a circle of
red dots appears around the stylus to indicate that the menu will soon pop up. Tap the
action you want to perform on the pop-up menu that appears.
6.3 Touch Screen Adjustments
The touch screen on DSV2+ terminals is calibrated during factory acceptance tests. If you wish
to recalibrate these setting to suit your personnel preferences the following options are available:
•
Calibration
– If your device isn’t responding properly to your screen taps, you may need
to recalibrate your screen. Go to the Control Panel, select Stylus Properties and under the
“Calibration” tab, click the “Recalibrate” button and follow the on screen instructions.
When you are told to “press enter” to accept the setting, just tap the screen anywhere,
then click the “OK” button.
•
Double-Click Sensitivity
– Go to the Control Panel and select Stylus Properties. Double–
tap the checkerboard grid to set the double-tap sensitivity for both speed and physical
distance between the taps. Then double tap the icon below the checkerboard to verify
your settings. Click the “OK” button when done.
•
Brightness and Contrast
– The display brightness and contrast can be adjusted for
different operating environment lighting conditions. Go to the Control Panel, select
Display and under the “Backlight” tab adjust the slider control then click the “OK”
button.
