Dataman 448PRO2AP, Руководство пользователя, Страница: 32 / 160

32
Calibration test
 Insert AP1 calibration test pod into Programmer Module Interface (PMI) connectors of the
programmer.

Run calibration test of programmer in PG4UW (Programmer / Calibration test).
AP1 calibration test pod
Multiprogramming by DATAMAN 48PRO2AP
During installation of PG4UW at Select Additional Tasks window you check, if is allowed install
DATAMAN 48PRO2AP multiprogramming control support.
For start of DATAMAN 48PRO2AP multiprogramming is necessary run special control program
pg4uwmc.exe. At this program user assign DATAMAN 48PRO2AP to control programs, may
load projects for all DATAMAN 48PRO2AP and run PG4UW for every connected and assigned
DATAMAN 48PRO2AP.
Technical specification
GENERAL

external power supply unit: operating voltage 100-240V AC rated, 90-264 VAC max.,
47-63 Hz, DC output 15V, 1A, output cable length 1000 mm (39.4 inch)
 power consumption max. 20W active, about 2W sleep
 dimensions 84x205x61 mm (3.3x8.1x2.4 inch)
Dimensions were measured without programming module inserted and does not include
projections. Total height of DATAMAN 48PRO2AP programmer with programming module
inserted depends on ZIF socket height and can vary between 80-90mm.

weight 0.7kg (1.5 lb)

operating temperature 5°C ÷ 40°C (41°F ÷ 104°F)
 operating humidity 20%..80%, non condensing