Dataman 448PRO2AP, Руководство пользователя, Страница: 140 / 160

140
This will open a ZIF socket actuation unit configuration dialog. Picture below shows the dialog,
when ZIF socket actuation unit is unconfigured and pressure plate is off.

ZIF socket actuation unit S/N is serial number of control unit of configured ZIF socket
actuation unit.
 Logical position shows the number of configured site, this is a programmer's site number
assigned by PG4UWMC software.

ZIF socket actuation unit total counts shows the number of total actuations (open/close
cycles) made by configured ZIF socket actuation unit.
 The label and check box marked status show the status of configured ZIF socket actuation
unit. By clicking the check box it's possible to enable (check) or disable (uncheck) the ZIF
socket actuation unit for further work.
Status label can have following values:

disable ZIF socket actuation unit is disable

error ZIF socket actuation unit is in error state, a reset command is required
 unconfigured ZIF socket actuation unit is not configured yet

ready ZIF socket actuation unit configured is ready for work
ZIF socket actuation unit configuration dialog control elements description