Datalogic VS Series, Инструкция по эксплуатации, Страница: 8 / 55

DATAVS2-VSM INSTRUCTION MANUAL
2
2
2 INSTALLATION
2.1 SAFETY RECOMMENDATIONS

Read the instruction manual carefully before installing the sensor and VSM.

Make sure that the product is suitable for the system that you intend to set up.

Connect the cables to the devices with the poles in the right direction.

Power up the devices following the instructions contained in the Manual.

Protect all devices against dust, dirt and humidity.

Never spill liquids on the devices

It is strictly prohibited to use DataVS2 in applications where the safety of persons
and/or things is guaranteed by the correct functioning of the device.

Always comply with all safety rules and regulations.

Never use the devices in environments where there is a risk of explosion.

Do not subject the devices to strong and continuous vibration.
2.2 DATAVS2 VSM DIN RAIL MOUNTING
There is a slot on the rear of the VSM which allows the user to connect the device to a DIN
guide.
Locking clips
Slot for the
DIN guide