Datalogic VS Series, Инструкция по эксплуатации, Страница: 14 / 55

DATAVS2-VSM INSTRUCTION MANUAL
8
3
3.4 GROUND CONNECTION
To comply with the EMC requirements, the Ethernet cable shield has to be grounded. (Use
the yellow/green cable supplied with the VSM).
Insert the washer M12 on the yellow/green cable in the VSM connector and then screw the
Ethernet cable until the ring nut reaches the washer.
Warnings

Insert the cable into the correct connector following the key indications inside the
body

After inserting the cable, turn the ring nut anticlockwise to ensure connection

Never force the cable inside the connectors.

Make sure that every cable is connected to the right connector

Before disconnecting the cable, completely turn the ring nut anticlockwise
3.5 DATAVS2 POWER CONNECTION
Connect the power and I/O cable (CV-A1-36-B-xx) inserting it into the connector identified by the icon
(
PWR-I/O ).
Washer M12
Ring Nut
PWR-I/O