Datalogic VS Series, Инструкция по эксплуатации, Страница: 18 / 55

DATAVS2-VSM INSTRUCTION MANUAL
12
5
5 MONITORING AN INSPECTION
The
“Monitor”
mode allows the user to check the correct functioning of the inspection defined
previously.
The chart shown below provides a description of the main modes available and shows how
to enable viewing.
Mode Example Enable Description
Standard
The monitor displays the sensor field focus
in full screen mode. The following
information is also displayed:

Inspection name and relative memory
slot

ROI

Inspection result

Logic value of the outputs
Tool
Result DOWN
ARROW
This screen shows the tool result of the
current inspection.
The results of all the inspection tools can
be displayed using the
RIGHT/LEFT
ARROWS .
Display
On
Condition
ESC
BUTTON
This mode displays only the images that
comply with the condition specified during
inspection
configuration using the
DataVS2 GUI.
Zoom
Mode UP
ARROW
An image of the sensor field focus is
displayed on the monitor with 200% zoom.
To move the zoom area, use the
ARROW
buttons. Press ESC to exit zoom mode.
Statistics
SET
BUTTON
Statistics on the inspection results are
displayed on the monitor, including:

Result

Current inspection outcome

Execution time (ms)

Total inspection execution time

Failure (%)

% of failed inspections of the total
number executed

Score

Current inspection result

Etc…
The statistics of the single tools can be
displayed by pressing
STATUS . Use
UP/DOWN ARROWS to scroll the tool
panels.
Use
RIGHT/LEFT ARROWS to change
the scale of the graphics.