Datalogic VS Series, Инструкция по эксплуатации, Страница: 31 / 55

ADVANCED FUNCTIONS
25
8
8.3 MEMORY MANAGEMENT
This paragraph explains how to transfer or cancel a memory slot between VSM and
DataVS2.
At this point the user can select the
“Memory Management”
icon and press SET . The
following panel is displayed:
As shown in the figure, the panel is divided in two: a VSM area (concerning the local
memory) and a DataVS2 area (remote device memory).
NOTE
If panel is accessed without DataVS2 connection, the sensor area cannot be
accessed and the user can operate only on the VSM memory (only
cancellations).
8.3.1 Slot Selection (VSM)
To select a memory slot to use, the focus must be moved on the
“MONITOR”
label using the
ARROWS and SET must be pressed.
Once done, the focus is moved in the list of slots where the user can scroll through the
memories only using the
UP/DOWN ARROWS
Press
SET to confirm the slot currently selected.
At this point, the focus returns outside the memory area and allows navigation between the
other buttons.
Memories of
DataVS2
Memories of VSM
Controls for VSM
Transfer
DataVS2
– VSM
Transfer
VSM
– DataVS2
Controls for
DataVS2