Datalogic VS Series, Инструкция по эксплуатации, Страница: 33 / 55

ADVANCED FUNCTIONS
27
8
8.3.4 Transfer from DataVS2 to VSM
To transfer the memory slot from DataVS2 to VSM (after selecting both the source as well as
the destination) move the focus on the “
Arrow on Left
” button and press
SET .
At this point the information label will request another operation confirmation, to proceed
press
ARROW UP, otherwise press ARROW DOWN to abandon.
If confermed,the data will be transferred between VSM and DataVS2. As soon as the
operation has finished, an information label will display the result and a refresh of the panel
names will be made.
8.3.5 Cancellation of a VSM Slot
First select the desired slot (refer to previous p
aragraph “Selection of slot (VSM)”).
Then move the focus on
“Delete Current”
button (on the bottom left side of the screen) and
press SET to confirm:
At this point the information label will request another operation confirmation:
To proceed press
ARROW UP otherwise, press ARROW DOWN to abandon. In both cases,
the information label will display the operation result and a refresh of the panel names will be
made.
Confirm