Datalogic Touch 90 pro, Руководство по продукции

Страница: 203 / 332

Code 11 Enter/Exit Programming Mode
Product Reference Guide 193
Code 11 Set Length 2
This feature specifies one of the bar code lengths for Code 11 Length Control . Length 2 is the
maximum label length if in Variable Length Mode, or the second fixed length if in Fixed Length
Mode. Length includes the bar code’s check and data characters.
The length can be set from 2 to 50 characters. A setting of 00 specifies to ignore this length
(only one fixed length). See
"Set Length 2" on page 280 for more detailed programming
instructions.
$CC1L2
Select Code 11 Length 2 Setting
To configure this feature, scan the ENTER/EXIT bar code
above, then the bar code at left followed by digits from the
Alphanumeric characters in
Appendix D, Keypad
repre-
senting your desired character(s). End by scanning the ENTER/
EXIT bar code again.
Make a mistake? Scan the CANCEL bar code to abort and not
save the entry string. You can then start again at the begin-
ning.
~
CANCEL
DEFAULT
50 = Length 2 is 50 Characters